Whether the conveyor is open chain link or flat belting, the high velocity blower driven air knife is the ideal choice for continuous belt cleaning. At a fraction of the cost of compressed air, the air knife can continuously clean the belt making product changeovers faster and easier. The wear and maintenance costs are greatly reduced when the conveyor is clean. In the case of flat belting, scraper blades have always been used. The friction and wear caused by the scraping is eliminated when a system is used to remove debris, dust and powders. The high velocity (37000 fpm), clean, dry air stream lifts the contaminates off, eliminating costly smears and buildup.
Systems For All Sizes
BASIC
Plus
Advanced
PRO
The benefits of working with us:
Reduced Rejects
Instant reduction in unit and case rejects.
Better labeling
Immediately improve paper/shrink wrapped labels and ink jet code quality.
Prevents Case Rot
Guaranteed increase in case strength and case longevity.
Pro Performance
Powerful enough for the most demanding can and bottling environments.
Expert Service
Over 35 years of can and bottle drying service and experience.
Capture Rinse Water
Capture more rinse water for sustainable water recycling
Saves Energy
Our blowers use a fraction of the energy vs. compressor based drying systems.
Mold Prevention
Reduce the likelihood of mold formation on can lids and under bottle caps.
